Marine Teak Furniture, Fittings, Lighting and Hardware
£130.00 – £317.00
Aqua Signal Series 34 LED Pedestals can be used on vessels < 20 m (< 50m for All Round 360° Lights). Visibility 2nm (3nm Masthead). Voltage range 12v to 24v. Wattage 5w (Tricolour), 1.5w (Anchor).
Housing material polycarbonate, seawater resistant, UV protected, non-corrosive, non-magnetic, shock resistant. Available in black or white case.
Also available with an Quick Fit connection system. Deck-mount, pre-wired with 200 mm cable.
Electric inverse polarity protection. Optics patented optics are UV and saltwater resistant requiring only a single LED per light source
Approvals USCG, IMO, RINA, MCA, BSH, GL, A16, CE
| Options | S34 LED Pedestal – All Round Green 12/24v (Black Case), S34 LED Pedestal – All Round Green 12/24v (White Case), S34 LED Pedestal – All Round Red 12/24v (Black Case), S34 LED Pedestal – All Round Red 12/24v (White Case), S34 LED Pedestal – All Round White 12/24v (Black Case), S34 LED Pedestal – All Round White 12/24v (White Case), S34 LED Pedestal – Masthead 12/24v (Black Case), S34 LED Pedestal – Masthead 12/24v (White Case), S34 LED Pedestal – Masthead/ARW 12/24v (Black Case), S34 LED Pedestal – Masthead/ARW 12/24v (White Case), S34 LED Pedestal – Tricolour 12/24v (Black Case), S34 LED Pedestal – Tricolour 12/24v (White Case), S34 LED Pedestal – Tricolour/ARW 12/24v (Black Case Quick Fit), S34 LED Pedestal – Tricolour/ARW 12/24v (White Case Quick Fit) |
|---|
You must be logged in to post a review.
Our LED Berth Light Tube D3 comes with a sleek and modern design. As well as having an angled white glass lampshade.
Polished aluminium housing, providing you with a warm & pleasant light. Power switch is located on the base of the light.
The Tube D3 has a rotatable arm, allowing you to customise the position of your light to suit the occasion.
Available on backorder.
Our LED Courtesy Light ‘Tilly II’ is designed to illuminate a full 360 degrees without blinding by using a polished stainless steel cover.
Also, the snap mounting is made easy on GRP or timber, but the unit also comes with a screw-in fixing ring. Because of this, the Tilly II can be used on carpeted surfaces where sealant cannot easily be used.
Available with Warm White or Blue LED.
Our LED Courtesy Light ‘Alioth’ has a crystal lens with single 3w LED. Because of this, you will be provide with a smooth light spread. Easy install with a spring mount system.
Available in Cool White or Warm White.
Retractive LED Dimmer Switch designed specifically to dim 12V LED tape lights.
The retractive dimmer works by simply pressing the button to turn the LED tape on/off. You can also press & hold the button to start dimming your LED tape to the desired light intensity.
Reviews
There are no reviews yet.